Difference between revisions of "Adding Amenities"

From Rts
Jump to: navigation, search
Line 4: Line 4:
  
  
'''Selected Amenities in each Auditorium'''
+
=='''Selected Amenities in each Auditorium'''==
  
 
Please be sure that your desired amenities are selected in your Auditorium Configuration.
 
Please be sure that your desired amenities are selected in your Auditorium Configuration.
Line 20: Line 20:
  
  
'''If the Film is Not yet Scheduled:'''  
+
=='''If the Film is Not yet Scheduled:'''==
  
 
You will need to make sure your Amenities are enabled. This can be found under your desired film.  
 
You will need to make sure your Amenities are enabled. This can be found under your desired film.  
Line 33: Line 33:
 
Select '''"Close"'''.
 
Select '''"Close"'''.
  
'''If the Film is Already Scheduled:'''
+
=='''If the Film is Already Scheduled:'''==
  
 
If your film is already in the schedule you will need to '''"manually"''' edit each film to include the desired amenities.
 
If your film is already in the schedule you will need to '''"manually"''' edit each film to include the desired amenities.

Revision as of 17:11, 25 April 2019

Please Call RTS at (865) 212-9703 to first configure these settings.

If you have called and have the configuration in place and are just needing to be sure the settings are set please follow below.


Selected Amenities in each Auditorium

Please be sure that your desired amenities are selected in your Auditorium Configuration. This can be double checked by navigating to

Set Up -> Auditoriums.


SU Auditoriums.PNG

Select your Auditorium from Schedule Locations. Choose the "Settings" tab. Check to select your desired amenities. "Close".


If the Film is Not yet Scheduled:

You will need to make sure your Amenities are enabled. This can be found under your desired film. To find the appropriate film, navigate to Set Up -> Films and select your film.

Once your film is selected choose the "Settings" Tab.

Check off any and all desired amenities.

Select "Save".

Select "Close".

If the Film is Already Scheduled:

If your film is already in the schedule you will need to "manually" edit each film to include the desired amenities.

To do this navigate to Actions -> Schedule -> Showtimes New Scheduler.

Double click on the film, or right click and select "Edit".


Actions Schedule ShowtimeNewScheduler.PNG

Scroll through to the desired amenity and set to "True".

Do this until all desired amenities are selected.

Select "Save".

Select "Close".

Navigate to Actions -> Digital Signage -> Refresh Signs.

If you do not see your amenities appear, please contact RTS at (865) 212-9703.