Adding Amenities

From Rts
Revision as of 22:40, 24 August 2018 by Dustiw (talk | contribs)
Jump to: navigation, search

Please Call RTS at (865)212-9703 to first configure these settings.

If you have called and have the configuration in place and are just needing to be sure the settings are set please follow below.

Selected Amenities in each Auditorium


Please be sure that your desired amenities are selected in your Auditorium Configuration. This can be double checked by navigating to Set Up -> Auditoriums

Select your Auditorium from Schedule Locations. Choose the "Settings" tab. Check to select your desired amenities. "Close".

If the film is not yet scheduled;


You will need to make sure your Amenities are enabled. This can be found under your desired film. To find the appropriate film, navigate to Set Up -> Films and select your film.

Once your film is selected choose the "Settings" Tab.

Check off any and all desired amenities.

Select "Save".

Select "Close".

If your film is already scheduled;


If your film is already in the schedule you will need to "manually" edit each film to include the desired amenities.

To do this navigate to Actions -> Schedule -> Showtimes New Scheduler.

Double click on the film, or right click and select "Edit".

Scroll through to the desired amenity and set to "True".

Do this until all desired amenities are selected.

Select "Save".

Select "Close".


Navigate to Actions -> Digital Signage -> Refresh Signs.

If you do not see your amenities appear, please contact RTS.