Bluetooth Bixolon SPP-R300 Setup
Bluetooth Bixolon SPP-R300 Printer Setup:
Step 1: Uninstall ALL Bixolon drivers from the machine and restart the Windows OS.
Step 2: Download and install the SPP-R300 Driver by clicking here or on the link below.
Step 3: During driver install choose "COM 4" for the port type.
Step 4: After driver installation, make sure printer is powered on without the error light flashing and restart the Windows OS.
Step 5: After Windows reboots, open the Bluetooth adapter and select “Add Device”. Choose the SPP-R300 device, then enter the pairing code. The default code is “0000”.
(Device image may differ from image below, but will look very similar.)
Step 6: After pairing is successful, go to Control Panel and issue a test page. There should be two printer icons, one will be the Windows printer and the other will be the Bluetooth added printer. Issue the test page from the Windows printer.