Difference between revisions of "Canadian EMV & Tap and Pay"

From Rts
Jump to: navigation, search
Line 12: Line 12:
  
 
The EMV Server will need the following version of Net-E-Pay installed. '''(ONLY ON SERVER)'''
 
The EMV Server will need the following version of Net-E-Pay installed. '''(ONLY ON SERVER)'''
  '''NETePay version is 5.06.11'''  [http://www.datacapepay.com/epay50/3643/ Click Here]
+
  '''NETePay version is 5.06.11'''  [http://www.datacapepay.com/epay50/3644/ Click Here]
  
 
Each client station will need the following version of DSI EMV ClientX installed:
 
Each client station will need the following version of DSI EMV ClientX installed:

Revision as of 17:09, 6 March 2019

Before you begin configuring your location to use EMV with Tap and Pay please have the following information ready...


1. Global Merchant Number (This may not change if you are enabling Tap and Pay for a location already configured for EMV)
2. DeploymentID
3. Have a list of all selling stations with the following information...
 3a. Computer Name
 3b. Serial Number of the reader attached to the machine
 3c. The Lane ID (Terminal number) that coincides with the serial number. 
Vantiv will be able to provide a list of serial numbers and the Lane ID that goes with it.

The EMV Server will need the following version of Net-E-Pay installed. (ONLY ON SERVER)

NETePay version is 5.06.11  Click Here

Each client station will need the following version of DSI EMV ClientX installed:

DSIEMVClientX is version 1.26 Click Here

Configuration Steps:

1. Confirm all open credit card transactions have been captured. See ____ for instructions on closing a batch.

2.