Concession Item Scanning

From Rts
Revision as of 19:27, 18 June 2019 by JacobS (talk | contribs) (Created page with "This article explains how to configure barcode scanning for concession items. Once configured, you will be able to ring items up in the register simply by scanning their barco...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This article explains how to configure barcode scanning for concession items. Once configured, you will be able to ring items up in the register simply by scanning their barcode.

This section is divided into three parts:

Scanner Configuration

Assigning Barcodes

Scanning Concession Items


Scanner Configuration

  • In order to scan items in RTS, your barcode reader must be in Serial / USB COM Port Emulation mode. The barcode scanner manufacturer will be able to provide more information on how to get your specific reader into the correct mode. RTS recommends using the TEEMI 2D Barcode Scanner. Please see Teemi 2D Barcode Scanner for more information on how to configure this reader.
  • Once your reader is in serial mode, you will need to determine what COM port it is being used on. This can be found in Device Manager under PORTS.

150px

  • Once you have determined the port, you will need to assign the port in RTS at Setup -> Local Computer -> Barcode. The Barcode Reader Model will be "Serial Port" and Reader port will be the port listed in Device Manager.

150px

Assigning Barcodes

  • Once you have configured your barcode reader, you will need to configure your concession items to link to specific barcodes. This can be done at Setup -> Concessions -> Configured Barcodes.

150px

  • In the Main Item List, select the item that would like to assign a barcode to. Once you've selected the item, simply use your barcode scanner to scan the item. The barcode number will then appear, associated with the concession item selected.
  • Multiple Barcodes can be used for the same item, but the same barcode cannot be used for multiple items.
  • If you attempt to assign a previously assigned barcode

Scanning Concession Items