Difference between revisions of "EMV Card Reader Drivers"

From Rts
Jump to: navigation, search
(Created page with "To setup EMV card readers, you will need drivers AND client controls for each station using a card reader. Be sure the readers are plugged in, powered on, and ready to go. Ins...")
 
Line 1: Line 1:
To setup EMV card readers, you will need drivers AND client controls for each station using a card reader. Be sure the readers are plugged in, powered on, and ready to go. Install drivers FIRST, as client controls will ask for a reboot after.<br>
+
To setup EMV card readers, you will need drivers AND client controls for each station using a card reader. Be sure the readers are plugged in, powered on, and ready to go. Choose the appropriate drivers and client controls below. Install drivers FIRST, as client controls will ask for a reboot after.<br>
 
<br>
 
<br>
 
[http://files.datacapepay.com/software/drivers/verifone/UnifiedDriver_5.0.5.2-B3.zip Verifone Card Reader]<br>
 
[http://files.datacapepay.com/software/drivers/verifone/UnifiedDriver_5.0.5.2-B3.zip Verifone Card Reader]<br>
 
[http://files.datacapepay.com/software/drivers/ingenico/IngenicoUSBDrivers_3.22_setup_SIGNED.exe Ingenico Card Reader]<br>
 
[http://files.datacapepay.com/software/drivers/ingenico/IngenicoUSBDrivers_3.22_setup_SIGNED.exe Ingenico Card Reader]<br>
 +
<br>
 
[http://files.datacapepay.com/software/emvus/dsiEMVUS-147-Install20200826-W8.exe US Client Controls]<br>
 
[http://files.datacapepay.com/software/emvus/dsiEMVUS-147-Install20200826-W8.exe US Client Controls]<br>
 
[http://files.datacapepay.com/software/dsiemvclientx/DSIEMVClientX-126-Install20190627-W8.exe Canadian Client Controls]<br>
 
[http://files.datacapepay.com/software/dsiemvclientx/DSIEMVClientX-126-Install20190627-W8.exe Canadian Client Controls]<br>
 
<br>
 
<br>
 
After installing the necessary, software, refer [https://www.rts-solutions.com/mw/index.php?title=Installing_EMV_Card_Readers Here] for the next steps.
 
After installing the necessary, software, refer [https://www.rts-solutions.com/mw/index.php?title=Installing_EMV_Card_Readers Here] for the next steps.

Revision as of 18:49, 2 September 2020

To setup EMV card readers, you will need drivers AND client controls for each station using a card reader. Be sure the readers are plugged in, powered on, and ready to go. Choose the appropriate drivers and client controls below. Install drivers FIRST, as client controls will ask for a reboot after.

Verifone Card Reader
Ingenico Card Reader

US Client Controls
Canadian Client Controls

After installing the necessary, software, refer Here for the next steps.