Difference between revisions of "Mag Cards"

From Rts
Jump to: navigation, search
m
Line 3: Line 3:
 
==Ordering Mag Cards==
 
==Ordering Mag Cards==
  
RTS suggests ordering cards from Plastic Printers. When cards are ordered, Plastic Printers will request
+
RTS suggests ordering cards from [http://www.plasticprinters.com Plastic Printers]. When cards are ordered, Plastic Printers will request
 
cards numbers from RTS so we can generate the card numbers directly within your database. This way
 
cards numbers from RTS so we can generate the card numbers directly within your database. This way
 
you will not have to manually enter the card numbers. Contact information is provided below.
 
you will not have to manually enter the card numbers. Contact information is provided below.
Line 19: Line 19:
  
  
When using a different card company:
+
'''When using a different card company''':
  
 
# Email [mailto:support@rts-solutions.com support@rts-solutions.com] including the locations' information and the number of card numbers needing to be generated.
 
# Email [mailto:support@rts-solutions.com support@rts-solutions.com] including the locations' information and the number of card numbers needing to be generated.

Revision as of 19:41, 24 April 2019

Mag Cards, or Magnetic Stripe Cards, are used for both Gift Cards and Loyalty Cards in RTS.

Ordering Mag Cards

RTS suggests ordering cards from Plastic Printers. When cards are ordered, Plastic Printers will request cards numbers from RTS so we can generate the card numbers directly within your database. This way you will not have to manually enter the card numbers. Contact information is provided below.


Ashley Otte
Ashley.Otte@PlasticPrinters.com

651.319.4758 Direct

741 Spiral Blvd. • Hastings, MN 55033

http://www.plasticprinters.com


When using a different card company:

  1. Email support@rts-solutions.com including the locations' information and the number of card numbers needing to be generated.
  2. Provide the following formatting information to your card manufacturer:
    1. Track 1, human-readable CR-LF
    2. Cards need to be encoded on ABA Track 1 only, nothing on Track 2 or 3. Cards can be lo-co or hi-co (lo-co is preferred and usually more cost effective).


Note: It is strongly recommended that the card number be printed on the cards due to normal wear of the magnetic strip.