Please Call RTS at (865) 212-9703 to first configure these settings.
If you have called and have the configuration in place and are just needing to be sure the settings are set please follow below.
Selected Amenities in each Auditorium
Please be sure that your desired amenities are selected in your Auditorium Configuration.
This can be double checked by navigating to
Set Up -> Auditoriums.
1) Select your Auditorium from Schedule Locations.
2) Choose the "Settings" tab.
3) Check to select your desired amenities.
If the Film is Not yet Scheduled:
You will need to make sure your Amenities are enabled. This can be found under your desired film.
- To find the appropriate film, navigate to
Set Up -> Filmsand select your film.
- Once your film is selected choose the "Settings" Tab.
- Check off any and all desired amenities.
- Select "Save".
- Select "Close".
If the Film is Already Scheduled:
If your film is already in the schedule you will need to "manually" edit each film to include the desired amenities.
To do this navigate to
Actions -> Schedule -> Showtimes New Scheduler.
Double click on the film, or right click and select "Edit".
Scroll through to the desired amenity and set to "True".
Do this until all desired amenities are selected.
Actions -> Digital Signage -> Refresh Signs.
If you do not see your amenities appear, please contact RTS at (865) 212-9703.