Calibrating your Touch Screen

From Rts
Revision as of 21:31, 30 May 2019 by MichaelG (talk | contribs)
Jump to: navigation, search

Calibrating

Partner SP5514

To calibrate your touch screen in RTS use the following procedure:

1) Go to: File -> Other -> Explorer.


FileOtherExplorer.JPG

2) Navigate windows explorer to your windows Desktop and double-click on the eGalaxTouch shortcut.


Desktop.JPG

3) If you have more than one touch screen monitor attached to your system you can use the Monitor Mapping button to select which monitor you'd like to calibrate. Then click the Tools' tab.


EGalaxyTouchMonitor Mapping.JPG

4) From within the Tools tab click the 4 Points Calibration button.


EGalaxTouchTools4PointsCalibration.JPG

5) Follow the instructions on the calibration screen by touching and holding the calibration dot until that corner is complete. The dot will move to all four corners of the screen.


CalibrationDot.JPG

Your monitor should now be calibrated.

Partner SP6515

Partner QM-150C Customer Facing Display

In order to recalibrate navigate to File -> Other -> Control Panel -> All. From here make sure View by is set to either Small or Large Icons, and select Tablet PC Settings.


WinTabletPcSettingd.png


Re-Mapping

Partner QM-150C Customer Facing Display