RTS Usher App
RTS Usher App
The RTS usher app allows you to pick up tickets from an Android device. It works similar to a barcode scanner allowing you to scan tickets your patrons print out or to also scan customer phones directly. Below are example screens and button descriptions to help use the app effectively.
NOTE: Tickets can only be picked up within a 45-minute window either before or after the performance start time.
To use the app:
1. Make sure your ushers are set up correctly in RTS to log-in to the app.
2. Once logged in, pressing the Scan button enables your devices camera to scan barcodes.
3. After scanning the ticket the usher will receive a pickup response indicating a successful ticket pickup or an error indicating possible issues with the ticket.
You will be required to set up an email address for "usher" employees and configure them to use the usher app.
NOTE: If you are not able to see your name in the Password list, an administrator with higher credentials will need to configure your settings.
To add an email address, navigate in RTS to
Setup –> Password.
Scroll through the permissions settings near to the bottom. Add your email address in the “Email Address” field under the Info Section.
You will also find two app permissions:
- Usher App - Setting to true allows this user to log in and use the usher app.
- Usher App Not Clocked In - Setting to true allows this user to log in and use the usher app even if they are not currently clocked into RTS (This is useful in the case that you have a device used by multiple employees)
- Login - Clicking this button takes you to the app login screen where you'll enter your email address and password.
- Config - Clicking this button opens the server configuration window where you'll enter in the local IP address of your RTS server.
This screen allows you to input the server IP address. The device you have the usher app on must be connected to the same RTS network as the RTS server. You'll enter the Local IP address of your RTS server in this window.
- Cancel - This button cancels the setup and returns you to the previous screen.
- Connect - This button connects you to the RTS Server IP address entered into the app.
After clicking Connect you will be prompted to save the connection per below:
- Login - After entering your login credentials this button logs you into the app.
- Clear - This button clears the login credentials in the case that multiple users are operating the same device or you've entered in incorrect credentials
- Flip Camera - If there are front and back cameras, this button will allow you to switch which camera to scan barcodes with.
- Light - If the device is equipped with a light, this button will turn the light on or off.
- Scan/Pause - Use this button to scan barcodes. When the camera is active this button will change to Pause, which will turn the camera back off.
The scan screen opens the camera and enables you to scan tickets. Once you've focused on a QR Code you should see the following dialog box:
See the ticket pickup responses below for further information on the status of pickup.