Zebra DS457 Reader

From Rts
Jump to: navigation, search

There are three recommended steps for configuring barcode scanners. This guide contains configuration barcodes that are specific to the Zebra DS457.

  1. Enable carriage return suffix / linefeed
  2. Enable streaming presentation mode to allow for scanning without pulling the trigger
  3. Enable USB Keyboard Emulation mode or USB Com Port Emulation Mode depending on how the scanner will be used (see below)

1) Adding a Carriage Return/Linefeed:

Scan the following barcodes:
Zebra DS457 CR-LF Suffix.PNG

2) Enable Streaming Presentation Mode:

Scan the following barcode:
Zebra DS457 Presentation Mode.PNG

3) Enable Emulation Mode

Scanning Tickets - USB Keyboard Interface Mode - Scanning Tickets

Scan the following "USB HID-KB" barcode:
ZebraUSBKB.png

Scanning Concession Items - USB COM Port Emulation Mode

In order to scan concession items in the selling screen, your scanner must be in USB COM Port Emulation Mode. To enable this, click the below link and download the driver for the USB COM Port Emulation.

USB COM Port Emulation Driver

  • After installing the driver, scan the barcode below to activate USB COM Port Emulation

ZebraCOM.png

Additonal Notes

  • Please see Concession Item Scanning for further direction on configuring your reader and concession items for this feature.
  • Tickets can also be scanned in this mode, as long as the scanner is configured at Setup -> Local Computer -> Barcode. More information on setting this up can also be found in Concession Item Scanning.
  • Factory Reset Barcode
    • Zebra DS457 Reset Codes.PNG

Zebra DS457 User Manual